1. Air Jet Aerator is very suitable for water depths over 2M for culturing farm ponds to aerated the bottom of the water, which has high oxygen supplyment, to purify the water.
2. Under the high density culturing farm, the effect of the oxygen supplyment would be better if it could be used together with our paddlewheel aerator.
3. With an adjustable jet angle it is suitable for the culturing farm ponds with different depths of water.
4. Air Jet Aerator is made with a durable plastic and stainless steel comstruction giving high durability and quality. It resists acid-alkalinity, sun exporure and salt water and sea water.
5. Full range of spare parts available. Easy assembly and maintenance with a long life span.
6. Air Jet Aerator is also suitable for the industrial waster water treatment.
7. It can be custom built according to your requirements.
8. Light weight, small measure, low noise, easy installation and convenient to operate makes this Aerator perfect for many applications.
We can supply aerators for different power, frequency and voltage according to customer needs. | 1. The Impeller Aerator has a protector installed in the motor. This automatically turns off the motor when the voltage of mains is too low or three-phase main is not in balance to protect the motor from being damaged. 2. It's gears are made of chromium-manganese-titanium alloy steel and immersion of carbon and nitrogen on the surface, which prolongs there life span greatly.
3. The patent technology of the non-welding assembled impeller can run stably without eccentric movement and is easily transported.
4. According to various environment and consumer requirements, we have engineered plastic and stainless steel impellers, which can ensure long time usage in either seawater or high corrosive industrial wastewater without frequently replacing the impellers or requirement for painting.
| Floating pump for oxygen-increasing and irrigation.
Connecting the floating pump with the spray nozzle, it becomes a spraying aerator. This Spraying Aerator was tested by the STBS in 1996 and 1998. The oxygen transfer capacity and power efficiency exceed the Agriculture Department Standard by about 60 percent. It can aslo be used for irrigation when the spray nozzle is taken away. Both of these modifications needs no tools and is easily applied. · One machine two purposes, low cost.
· Light weight,flexible and convenient.
· Low noise and non-oil sewage.
· Applicable for the single-phase power source.
| FUTI Paddlewheel Aerator is produced by break through technology improvements according to the most popular international model at the moment by our company, in which implicit multiple national patents. We adopt whole plastic floats and stainless steel transmission shafts and frames. In April 2000,our aerators were passing examined by the Mechanical Instrument Quality Surveillance Inspection Center of National Fishery. All the 9 quotas reached the standard of SC/T6017-1999. Among which: oxygen transfer capacity is 2.59kg (O2)/h - 36.3% higher than the standard; power efficiency is 1.71kg (O2)/h.kw - 36.8% higher than the standard. ·Arcuate bevel-gear instead of worm gear is adopted, with high efficiency and saving over 20% electric energy than traditional models.
·Arcuate bevel-gear is made of chromium-manganese-titanium with carbonitriding on the surface. This ensures a long life span and high rigidity.
·Mechanical seal is available to insure against oil leak pollution.
·Protector inside is available to avoid motor being burnt out accidentally.
·PE float, nylon impeller, and stainless steel shaft and frame are available.
| Injector aerators are electrically operated aerators with suction from the surface able to introduce air and/or oxygen beneath the surface of the water.The injector aerator, works by producing a flow of water that creates a pressure force that can draw air and/or oxygen through the supported and regulation pipes and disperses very fine bubbles with the active turbulence of the propeller. · It is light and small, little noise and easily installed.
· It can adjust to submerge to different depths of water.
· Adjustable flow angle to control the flow direction.
· It is available for all kinds of water and water procedure.
|
